Gefen TOOLBOX GTB-MINI-PACS, User Manual

Page: 82 / 88

78
APPENDIX
Learning IR Commands via Telnet
The Mini PACS has eight (3) IR Emitter outputs. Each of these IR Emitters can
be connected to device. The Mini PACS can learn new IR commands and then
send the learned IR command to any or all of the devices at once. The Mini
PACS can store commands for up to 20 devices. Each of the stored devices can
have up to 64 commands.
In the example below, we will have the Mini PACS learn a play command for a
Sony DVD player.
1. Access the Mini PACS using Telnet. See page 7 - 11 for setting up Telnet.
2. Add a new device to the Mini PACS by executing the # add_device
command (page 64). Provide the name of the device when running the
command :
Example:
add_device sonyDVD
New device sonyDVD was added to system!
3. Execute the learn_ir_cmd command followed by the command name, then d
the device name:
Example:
learn_ir_cmd play sonyDVD
4. When prompted, press the button to be learned, on the IR remote control:
IR RMT Learning mode
Press the desired RMT command play for device sonyDVD
Captured timing array 1
Cap timing array 1 end
5. After the button has been pressed, the Mini PACS will process the
command. When prompted, validate the command by pressing the same
button on the IR remote control:
Press again the same RMT command
Cap timing array 2