To ensure maximum effectiveness of water disinfection, it is important
to regularly clean the quarts sleeve. Cleaning will remove the coating on
the inner surface of the sleeve which is gradually formed by the
minerals contained in the water and which reduces the amount of UV
light reaching the water.
It is recommended that the sleeve is cleaned regularly, 3 to 4 times a
year. Cleaning may be required more frequently depending on the
quality of the water. To clean the quartz sleeve, take the following steps:
Step 1.Shut off water supply and let water drain from the water pipes.
Step 2.Remove the UV lamp (follow the UV lamp replacement
instructions).
Step 3.Using the drain port, drain
water from the UV disinfection
system chamber.
Step 4.Unscrew the close-ended cap
and carefully remove the silicone
stopper.
Step 6. To install a new lamp, follow instructions in the
INSTALLATION AND OPERATION INSTRUCTIONS
part of this
manual Step 7 (on page 6)
Once the lamp is properly installed, connect the system to power. The
system is ready to use.
Quartz Sleeve Replacement and Cleaning
11
*
Applies only to GP-UV55W
*
www.geekpure.cc
