UV LAMP REPLACEMENT
Replacement is quick and easy. It does not require any special skills or
tools. Follow these instructions to replace the UV lamp in your
disinfection system:
Step 1. Disconnect the UV system from power. Let it stand for a few
minutes to cool down.
Step 2. While it may remain connected to the water supply, turn off the
water and do not use it until the lamp is replaced and the system is ready
to be used. Before taking the lamp out of the system, drain all the water
out of it.
Step 3. Wear gloves to prevent contamination of the lamp surface.
Step 4. Slowly pull the lamp
cord away from the chamber
and carefully disconnect the
lamp from the cord. Do not
try to untwist the cord.
Simply pull it away. Avoid
touching the glass part of the
lamp.
Step 5.Remove the lamp from
the chamber. Be careful not to
angle the lamp, as in case it
touches the quartz sleeve, the
sleeve can be damaged.
Operating & Maintenance
DO NOT USE WATER
DURING THIS PROCEDURE
CAUTION
Prior to perfoming any work on
the disinfection system, always
disconnect the power supply
first.
WARNING
NOTE
Replace the UV lamp annually (or biannually if seasonal
home use) to ensure maximum disinfection.
10
www.geekpure.cc
