Ultra Violet Water disinfection is a physical disinfection process and does
not add any potentially harmful chemicals to the water. It is essential to
chemically disinfect the plumbing system located after the UV system to
ensure that the plumbing system is free from any bacteriological
contaminants.
The first round of disinfection should be done immediately after the UV
system is installed. It should then be repeated every time the UV system has
been out of service for any reason. To disinfect the water distribution
system, take the following steps:
2.Remove cartridges from all
bowls of the housing water
filter.
3.Fill half of one filter bowl
with the household (5.25%)
chlorine (bleach) and re-install
all the bowls (without
cartridges) back into the filter
housing head. DO NOT use
hydrogen peroxide.
Disinfection Procedure
8
1.Make sure all tabs are
closed and the water supply is
shut off. If in place, the by-
pass valve is to be closed if
equipped.
www.geekpure.cc
