20
Y Series TechBook
AMP pins and housings
Industry standard AMP pins and housings are supported as well Also, a special PP-1 splitter can be ordered and used
to split an output into 2 parallel outputs (ie a single O3 output could be used for an ozonator and UV generator, 03
or CP)
Depending on the specific model ordered, different numbers of AMP housings are supported
Note that in some instances, a specific output is in reality the low-speed output of the last unused 2-spd accessory
For example, in an inyt-7, if Pump #3 is a single-speed pump, the unused low speed output can be used as a
circulation pump Both accessories thus driven must be of the same voltage (120 V or 240 V)
A floating connector is a connector that’s not attached to a side bracket Note that all optional PP-1 splitters are
floating (the male end is attached though)
Common (white)
Common (white)
Pin #3 (White)
Pin #3 (White)
Pin #2 (N/A)
Pin #2 (N/A)
Ground (green)
Ground (green)
Pin #4 (Green)
Pin #4 (Green)
High speed (red)
Live (black)
Pin #1 (Black)
Pin #1 (Black)
Low speed (black)
2-speed
