Carry out the following steps:
1.
Shut off the compressed air supply.
2.
Use the hose cutter to cut the pneumatic hoses square.
3.
Push the air hose into the air connector on the control top.
4.
Re-open the compressed air supply.
®
Establish a hose connection.
6.7
General
Danger
Live parts
Electrical shock can result in serious personal injury or death.
► Only allow properly qualified staff to carry out work on the electrical
equipment.
► Prior to establishing electrical connections check the maximum
permissible operating voltage.
Carry out the following steps:
1.
Connect in accordance with the connection plan and the information in the
corresponding instruction manual of the control top or in the data sheets of
the magnetic switch and initiators.
®
Done
Hint!
The proximity switches in the control top are factory set. During
transport and installation it can happen that the settings are changed,
so that readjustment may be required (see the Operating Instructions
for the control top).
Assembly and installation
General
430BAL008430EN_4
08.03.2022
31
Summary of Contents for VARIVENT X
Page 87: ...Appendix 430BAL008430EN_4 08 03 2022 87 ...
Page 88: ......
