2
Safety
2.1
Intended use
The valve is intended only for the described purpose. Using the device for any
other purpose is considered contrary to its designated use. GEA Tuchenhagen
will not accept any liability for damage resulting from improper setting: the risk
lies entirely with the operator of the facility. The prerequisite for the reliable and
safe operation of the valve is proper transportation and storage as well as
professional installation and assembly. Operating the unit within the limits of its
designated use also involves adhering to the operating, maintenance and
servicing instructions.
2.1.1
Requirements for operation
The prerequisite for reliable and safe operation of the component is proper
transportation and storage as well as professional installation and assembly.
Operating the unit within the limits of its designated use also involves adhering to
the operating, inspection and maintenance instructions.
2.1.2
Pressure equipment directive
The valve is a piece of pressure equipment (without safety function) in the sense
of the pressure equipment directive 2014/68/EU: Classified according to Annex II
in category 1.
According to the scope of directive 2014/34/EC, article 1, paragraph 2, f, the
exception of the directive applies, due to conformity with the machine directive
2006/42/EU.
The nominal diameters smaller than DN 25 are subject to article 4, paragraph 3
of the Pressure Equipment Directive which specifies sound engineering practice.
Nominal diameters ≥ IPS 4“; DN 125 valid for the fluid group II.
In the event of any deviations, GEA Tuchenhagen GmbH will supply a specific
Declaration of Conformity.
2.1.3
ATEX directive
In areas with an explosive atmosphere, only valves suitable for use in such areas
may be used.
Refer to and observe the additional operating instructions “ATEX version valves”.
For details regarding the marking of valves for potentially hazardous areas also
refer to the additional operating instructions “ATEX version valves”.
If these valves are used in areas with a potentially explosive atmosphere, you
must absolutely comply with directive 2014/34/EC with respect to all ignition
hazards.
2.1.4
Improper operating conditions
The operational safety of the component can not be guaranteed under improper
operating conditions. Therefore avoid improper operating conditions.
The operation of the component is not permitted if:
Safety
Intended use
430BAL008430EN_4
08.03.2022
9
Summary of Contents for VARIVENT X
Page 87: ...Appendix 430BAL008430EN_4 08 03 2022 87 ...
Page 88: ......