41
Electrical Connections and Commissioning
Adjusting the Position Detecting Devices
Adjusting of the external Sensor in the Lantern
Fitting the proximity
switch holder
Carry out the following steps:
1.
Place the proximity switch nut (2) against the slot (4.1) from the inside of the lantern
(4) and hold it in position with a finger.
2.
Fix the sliding piece (1) with the countersunk screw (3) in the orientation shown –
with the mounting hole (1.1) facing in the direction of the housing (5).
3.
Tighten the proximity switch nut (2) with the countersunk screw (3).
