Electrical Connections and Commissioning
Adjusting the Position Detecting Devices
44
Operating Instructions · VARIVENT
®
Mixproof Valve M-C/2.0
Edition 2018-10-04
Fitting the proximity
switch holder
Carry out the following steps:
1.
Place the proximity switch nut (2) against the slot (4.1) from the inside of the lantern
(4) and hold it in position with a finger.
2.
Fix the sliding piece (1) with the countersunk screw (3) in the orientation shown –
with the mounting hole (1.1) facing in the direction of the housing (5).
3.
Tighten the proximity switch nut (2) with the countersunk screw (3).
Adjusting the prox-
imity switch holder
Carry out the following steps:
1.
Screw the adjusting screw (6) into the proximity switch holder down to the upper
edge of the balancer (7).
