3.1.7
Safety Air Exhaust/Installation Position
To provide protection against excess pressure which can build up in the inside of
the control top, a vent plug E2 is fitted in the base. In operating mode, the
exhaust air from the lifting actuators is discharged via this vent plug. In the
unlikely event of a damaged solenoid valve or in case of sealing problems,
pressure relief is ensured.
Fig.7:
Control top (standard variant in IP66)
This vent plug is a safety device that must be handled as such. Do not cover the
vent plug. When fitting the control top note that the installation position of the vent
plug E2 must never be pointing vertically upwards.
Description
430BAL010699EN_6
17.03.2022
21
Summary of Contents for T.VIS A-15
Page 6: ...430BAL010699EN_6 6 17 03 2022...
Page 116: ......