10.5
Dismantling the Control Top into its Components
10.5.1 Variants of the Control Top
The control top can be fitted with:
•
3 solenoid valves (63) and without or with 1 logic element NOT (64) or
•
2 solenoid valves (63) and 1 control plate (65) and without or with 1 logic
element NOT (64) or
•
1 solenoid valve (63) and 2 control plates (65) and without or with 1 logic
element NOT (64) or
•
1 solenoid valve (63) or
•
without solenoid valve with 1 control plate (65).
10.5.2 Removing the Cap
Fig.62
Notice
Electrical voltage
Danger to life
► Switch off the voltage supply and the control air before removing the
control top.
Carry out the following steps:
1.
Undo the 3 screws (25) of the cap (7) and remove the cap (7) from the base
(5).
®
Done
10.5.3 Removing the printed circuit board
Carry out the following steps:
1.
Unscrew and remove the screws (77).
Maintenance
Dismantling the Control Top into its Components
430BAL010699EN_6
17.03.2022
87
Summary of Contents for T.VIS A-15
Page 6: ...430BAL010699EN_6 6 17 03 2022...
Page 116: ......
