GEA ARIETE, Instructions For Use And Maintenance Manual

Page: 537 / 556

12
6.2 - Lubrication table
Independently-lubricated bearings, motor-bearings, backstop device fitted to motor:
lubrication is « for life » (except some cases of motors in which relubrication device is adopted). Should there be either a possibility of the grease
becoming contaminated, or a particular type of duty-cycle, it is good policy to check on the state of the grease (between one change and the next,
or every year or 2 years) and remove and replace grease in independently-lubricated bearings (every change or every other change, or every 2 or
4 years). Bearings should be filled with ESSO BEACON 3 bearing-grease for ball bearings, KLÜBER STABURAGS NBU 8 EP for roller bearings
and ESSO BEACON 2 for backstop device.
Product How supplied* and plugs Directions for first filling
Worm
sizes 32 ... 81
Worm
sizes 100 ... 250
Coaxial
sizes 32 ... 41
Right angle shaft
sizes 80 ... 125
Coaxial
sizes 50 ... 81
Parallel and
right angle shaft
sizes 50 ... 80
Coaxial
sizes 100 ... 180
Parallel and
right angle shaft
sizes 100 ... 631
Right angle shaft
sizes 160 ... 320
Shaft mounted
FILLED WITH
SYNTHETIC OIL
AGIP Blasia S 320, KLÜBER
Klübersynth GH 6-320,
MOBIL Glygoyle HE 320, SHELL
Tivela WB/SD
Worm speed
ø
280 min
-1
KLÜBER Klübersynth GH 6-680,
MOBIL Glygoyle HE 680
Filler/drain plug
2 filler/drain plugs for sizes 80, 81
WITHOUT OIL
(except different statement on
lubrication name plate)
Filler plug with valve,
drain and level plug
Before putting into
service, fill to speci-
fied level with
syn-
thetic oil (AGIP Bla-
sia S, ARAL Degol
GS, BP-Energol SG-
XP, MOBIL Glygoyle
HE, SHELL Tivela oil
... , KLÜBER Klüber-
synth GH6 ...) having
the ISO viscosity
grade given in the
table.
FILLED WITH
SYNTHETIC GREASE
SHELL Tivela Compound A
IP Telesia Compound A
MOBIL Glygoyle Grease 00
Filler/drain plug
(only for coaxial)
FILLED WITH
SYNTHETIC OIL
KLÜBER Klübersynth GH 6-220,
MOBIL Glygoyle 30
Filler/drain plug
2 filler/drain plugs for sizes 80, 81
WITHOUT OIL**
(except different statement
on lubrication name plate)
Filler plug with valve
(with breathing for shaft
mounted gear reducers),
drain and level plugs
Before putting into service,
fill to specified level with
mineral oil (AGIP Blasia,
ARAL Degol BG, BP-En-
ergol GR-XP, ESSO Spartan
EP, IP Mellana oil, MOBIL
Mobilgear 600, SHELL
Omala, TEXACO Meropa,
TOTAL Carter EP) or
poly-
glycol** synthetic oil
(KLÜBER Klübersynth GH6
..., MOBIL Glygoyle, SHELL
Tivela oil) or
polyalphaole-
fines** synthetic oil (AGIP
Blasia SX, CASTROL Tribol 1510, ELF Reductelf SYNTHESE, ESSO Spartan SEP, KLÜBER Klüber-
synth EG4, MOBIL SHC) having the ISO viscosity grade given in the table.
ISO viscosity grade [cSt]
Ambient temperature 0
4
40 °C
2)
Worm speed Gear reducer size
min
-1
100 125 ... 161 200, 250
B3
1)
, V5, V6 B6, B7, B8 B3
1)
, V5, V6 B6, B7, B8
2 800
4
1 400
3)
320 320 220 220
1 400
4
710
3)
320 320 320 220
710
4
355
3)
460 460 460 320
355
4
180
3)
680 680 460 460
< 180 680 680 680
1) Not stated on the name plate.
2) Peaks of 10 °C above and 10 °C (20 °C for
ø
460 cSt) below the ambient tem-
perature range are acceptable.
3) For these speeds we advise to replace oil after running-in.
ISO viscosity grade [cSt]
Speed n
2
Ambient temperature
1)
[°C]
min
-1
mineral oil synthetic oil
Right
angle shaft Others 0
4
20 10
4
40 0
4
40
> 710 > 224 150 150 150
710
4
280 224
4
22,4 150 220 220
280
4
90 22,4
4
5,6 220 320 320
< 90 < 5,6 320 460 460
1) Peaks of 10 °C (20 °C) below and 10 °C above the ambient temeperature
range are acceptable.