GEA ARIETE, Instructions For Use And Maintenance Manual

Page: 521 / 556

VLT
®
5000 Series
■
Factory Settings
PNU Parameter Factory setting Range Changes 4-Setup Conversion Data
# description during operation index type
001
Language
English Yes No 0 5
002 Local/remote control Remote control Yes Yes 0 5
003
Local reference
000.000 Yes Yes -3 4
004
Active setup
Setup 1 Yes No 0 5
005 Programming setup Active setup Yes No 0 5
006 Copying of setups No copying No No 0 5
007 LCP copy No copying No No 0 5
008 Display scaling of motor fre-
quency
1 0.01 - 100.00 Yes Yes -2 6
009 Display linie 2 Frequency [Hz] Yes Yes 0 5
010
Display line 1.1
Reference [%] Yes Yes 0 5
011
Display line 1.2
Motor current [A] Yes Yes 0 5
012 Display line 1.3 Power [kW] Yes Yes 0 5
013 Local control/configura LCP digital control/
as par.100
Yes Yes 0 5
014 Local stop Possible Yes Yes 0 5
015 Local jog Not possible Yes Yes 0 5
016 Local reversing Not possible Yes Yes 0 5
017 Local reset of trip Possible Yes Yes 0 5
018 Lock for data change Not locked Yes Yes 0 5
019
Operating state at power-up,
local control
Forced stop, use
saved ref.
Yes Yes 0 5
Changes during operation:
"Yes" means that the parameter can be changed,
while the VLT frequency converter is in operation.
"No" means that the VLT frequency converter must
be stopped before a change can be made.
4-Setup:
"Yes" means that the parameter can be programmed
individually in each of the four setups, i.e. the same
parameter can have four different data values. "No"
means that the data value will be the same in all four
setups.
Conversion index:
This number refers to a conversion figure to be used
when writing or reading by means of a VLT fre-
quency converter.
Conversion index Conversion factor
74 0.1
2 100
1 10
0 1
-1 0.1
-2 0.01
-3 0.001
-4 0.0001
Data type:
Data type shows the type and length of the telegram.
Data type Description
3 Integer 16
4 Integer 32
5 Unsigned 8
6 Unsigned 16
7 Unsigned 32
9 Text string
MG.51.A1.02 - VLT is a registered Danfoss trade mark
187
Miscellaneous