GEA ARIETE, Instructions For Use And Maintenance Manual

Page: 500 / 556

VLT
®
5000 Series
Inialisation [3] is selected if the factory setting of the
unit is desired without resetting parameters 500, 501
+ 600 - 605 + 615 - 617.
NB!:
The motor must be stopped
before initialisation can be carried out.
Procedure for initializing:
1. Select Initialisation.
2. Press the [OK] key.
3. Cut off the mains supply and wait for the light in
the display to go out.
4. Connect to mains.
Manual initialisation can be carried out by holding
down three keys at the same time as the mains volt-
age is connected. Manual initialisation sets all
parameters to the factory setting, except 600-605.
The procedure for manual initialisation is as follows:
1. Disconnect the mains voltage and wait for the
light in the display to disappear.
2. Hold down [DISPLA Y/[MENU]+[OK]
while at the same time connecting the mains
supply. The display will now read MANUAL INI-
TIALIZE.
3. When the display reads UNIT READ Y, the VLT
frequency converter has been initialized.
Parameter no. Description
Nameplate Display text
621 VLT type (VLT TYPE)
622 Power section (VLT ORDERING NO)
623 VLT ordering number (VLT ORDERING NO)
624 Software version number (SOFTWARE VERSION)
625 LCP identification number (LCP ID NO)
626 Database identification number (PARAM DB ID)
627 Power section identification number (POWER UNIT DB ID)
628 Application option type (APP. OPTION)
629 Application option ordering number (APP. ORDER NO)
630 Communication option type (COM. OPTION)
631 Communication option ordering number (COM. ORDER NO)
Function:
The key data of the unit can be read out via the dis-
play or the serial communication port.
Description of choice:
VLT type, parameter 621:
VLT Type indicates the unit size and basic function
concerned.
For example: VLT 5008 380-500 V.
Power section, parameter 622:
The power section states the given power section
being used.
For example: Extended with brake.
VLT ordering number, parameter 623:
Ordering number gives the ordering number of the
VLT type in question.
For example: 175Z0072.
Software version number, parameter 624:
Software version gives the version number.
For example: V 3,10.
LCP identification number, parameter 625:
The key data of the unit can be read out via the dis-
play or the serial communication port.
For example:ID 1,42 2 kB.
Database identification number, parameter 626:
The key data of the unit can be read out via the dis-
play or the serial communication port.
For example: ID 1,14.
✭
= factory setting. () = display text [] = value for use in communication via serial communication port
MG.51.A1.02 - VLT is a registered Danfoss trade mark
166