GE VP11, Reference Manual

Page: 98 / 118

Table 42: VTM22 DVI-I connector digital pin assignments
Pin Signal name Pin Signal name
1 TX2- (TMDS Data2–) 13 NC
2 TX2+ (TMDS Data2+) 14 FUSE_VCC
3 GND 15 GND
4 NC 16 HOTPLUG
5 NC 17 TX0- (TMDS Data0–)
6 DDC Clock 18 TX0+ (TMDS Data0+)
7 DDC Data 19 GND
8 VSYNC 20 NC
9 TX1- (TMDS Data1–) 21 NC
10 TX1+ (TMDS Data1+) 22 GND
11 GND 23 TXC+ (TMDS Clock+)
12 NC 24 TXC- (TMDS Clock–)
Table 43: VTM22 DVI-I connector analog pin assignments
Pin Signal name
C1 RED Analog Red Video
C2 GREEN Analog Green Video
C3 BLUE Analog Blue Video
C4 HSYNC Analog Horizontal Sync
C5 GND
Note:
The graphics controller supports the functions TMDS and analog RGB, but
only one function is available at the same time. The RGB-Signals are shared
between P4000 and P4001.
USB connectors (P1600, P1601)
Two channels are available at the standard USB connectors. FUSE_VCC is
fused with 2 A, but for normal operation don’t exceed 1 A at this pin.
GE Intelligent Platforms – VR11, VP11 Hardware Reference Manual, Second Edition Page 98