GE VP11, Reference Manual

Page: 48 / 118

Table 6: VMEbus connector P0 with partial I/O and HD Interface
a b c d e f
1 GND GND GND GND GND GND
2 LPA_DA- GND LPA_DC- GND
3 LPA_DB- GND LPA_DD- GND
4 LPB_DA- GND LPB_DC- GND
5 LPB_DB- GND LPB_DD- GND
6 \M1ACT \M2ACT +3.3V_SW
1)
\M1LINK \M2LINK GND
7 PMC2IO05 PMC2IO04 PMC2IO03 PMC2IO02 PMC2IO01 GND
8 PMC2IO10 PMC2IO09 PMC2IO08 PMC2IO07 PMC2IO06 GND
9 PMC2IO15 PMC2IO14 PMC2IO13 PMC2IO12 PMC2IO11 GND
10 PMC2IO20 PMC2IO19 PMC2IO18 PMC2IO17 PMC2IO16 GND
11 PMC2IO25 PMC2IO24 PMC2IO23 PMC2IO22 PMC2IO21 GND
12 PMC2IO30 PMC2IO29 PMC2IO28 PMC2IO27 PMC2IO26 GND
13 PHD06
PHD08 PHD07 PMC2IO32 \PHD_RST GND
14 PHD11 PHD04 PHD10 PHD05 PHD09 GND
15 PHD01 PHD13 PHD02 PHD12 PHD03 GND
16 PMC2IO50 PMC2IO49 PHD15 PHD00 PHD14 GND
17 \PHD_DACK \PHD_IORDY \PHD_IOR \PHD_IOW PHD_DRQ GND
18 PHD_A2
PHD_A0 PHD_ATA PHD_A1 IRQ14 GND
19 N.C. \PHD_CS1 \PHD_CS0 PMC2IO62 PMC2IO61 GND
Signal groups:
IDE Hard disk signals:
PHD_... and \PHD_....
Gigabit Ethernet LPA_… and LPB_…
Note:
1)
+3.3V_SW switched-on after ramp-up. This is the only 3.3 VDC source for
the Transition Module VTM22. Do not connect the +3.3V_SW pin to +3.3 V
pins; damage may occur.
GE Intelligent Platforms – VR11, VP11 Hardware Reference Manual, Second Edition Page 48