77
Use this menu to enter the Factory Password, and restore the unit to the factory defaults. The Factory reset
password is
8111
.
Use the
Up/Down Arrow keys
to select a character, then use the
Enter
button to complete the selection, and
move to the next character.
Clicking the
Enter
button on the last character will complete the password selection and return the unit to the
factory default configuration.
Note:
The unit’s current IP addresses will not reset to the factory settings.
Advanced Menu
/
Change Password
Use this feature to change the Operator, Ethernet, or DDNS passwords.
Figure 91. The password selection menu
Changing the Operator (Advanced menu) Password
To change the password:
1. Highlight the Operator password, then click the
Enter
button. A password box will appear.
2. Enter the new password using the
Up/Down Arrow keys
to select the number then click enter to move
to the next field. clicking enter on the last number field will open the confirmation box.
3. Re-enter the password.
4. Highlight
OK
, then click the
Enter
button. The user will be prompted, indicating if the password was
entered correctly and changed.
The Ethernet Password
The Ethernet Password feature limits access to only those users who access the unit using the password feature
of SymNav software. When the unit is first setup, the default is
No Password Protection
. Meaning, anyone
using SymNav software and accessing with an ethernet connection can connect to the unit.
Activating the Ethernet Password
1. Enter the new password using the
Up/Down Arrow keys
.
2. Highlight
OK
, then click the
Enter
button.