manualshive.com logo in svg

GE SymDec 4, User Manual, Page: 54 / 90

Share
Download
GE SymDec 4 User Manual Download Page 54

SymDec 4

User Manual

48

Main Menu 

/

 Alarms 

/

 Enable / Disable

Figure 48. The alarms enable. disable menu

Use this menu to Enable or Disable the alarm inputs.  Select from the following:

•

Individual Enable:  

Allow the user to access the Alarm Enable submenu, and enable or disable alarm 

inputs on a per camera basis.

•

Enable All

•

Disable All

Save changes and exit the menu:

  Select 

[OK]

, then click the 

Enter

 button.

Exit the menu without making changes:

  click the 

Menu

 button, or select 

[CANCEL]

, then click the 

Enter

 

button.

Main Menu / Alarms 

/

 Alarm History

Figure 49. The alarm history menu

Use this window to view a list of the 100 most recent alarms. Alarms are displayed 10 at a time.  Information 
displayed in this window is:

•

The alarms number in the list.

•

The date of the alarm (month and day).

•

The time of the alarm (hours, minutes, and seconds).

•

The number of the camera input in alarm.

Summary of Contents for SymDec 4



























































































Reviews:

No comments