23
bar. Typical numbers are shown for the purpose of illustration. Real addresses must be chosen by the user
based on actual network parameters.
At a minimum the following information must be known:
•
The IP addresses of all the units involved in this network.
•
The Subnet Masks of all the units involved in this network.
•
The Gateway addresses of all the units involved in this network.
•
A valid streaming or multicast address.
Streaming settings for UDP unicast or TCP
Figure 14. A sample network configuration
Figure 15
illustrates streaming settings for a UDP unicast from the SymNet to the SymDec 4.
The SymDec 4 is setup as a receiver in
Normal
mode with the
Receiver Cam Map IP
address set at
192.168.10.20 (The IP address of the sender). The SymNet is setup as a sender with the streaming address set