manualshive.com logo in svg

GE SymDec 4, User Manual, Page: 25 / 90

Share
Download
GE SymDec 4 User Manual Download Page 25

19

WebServer

The SymDec 4 has an integrated WebServer interface. The WebServer provides the user the means to remotely 
configure, upgrade, and view information about the SymDec 4. The default IP address from the factory is 
192.168.1.10. To get the SymDec 4 to stream video, at a minimum the 

Streaming settings

 must be configured.

To access the web interface: 

1. Launch Internet Explorer (version 5.5 or later) on any local Internet connected PC or laptop. 

2. Type in the unit’s IP address (

xxx.xxx.xxx.xxx

) or 

hostname

 (see network settings page) in the address 

field and click enter. The Enter Network Password box should appear.

3. Enter the correct Username and Password in their respective fields (the default username and password 

is 

admin

). Click the OK button. 

4. The SymDec 4’s home page window should appear. 

Figure 11. SymDec 4 home page

On this page you will find links for 

SymBrowser, Configure

, 

Info

, and 

Upgrade

.

Note:  

The SymBrowser is discussed in detail at the end of this chapter.

Clicking on the 

Configure

 link will launch the Configuration web page. 

Summary of Contents for SymDec 4



























































































Reviews:

No comments