manualshive.com logo in svg

GE SymDec 4, User Manual, Page: 72 / 90

Share
Download
GE SymDec 4 User Manual Download Page 72

SymDec 4

User Manual

66

Advanced Menu 

/

 Motion Detection

Use this menu to:

•

Enable motion detection on a per camera basis.

•

Activate individual zones in a scene to respond to motion.

•

Activate the on-screen motion detection indicator.

•

Set motion detection as activity or intrusion detection.

•

Configure the motion detection parameters on per camera basis.

Figure 72. The motion detection menu

Advanced Menu/ Motion Detection/Enable/Disable Detection

Figure 73. The enable/disable detection menu

Selecting 

Enable All

 or 

Disable All

 from this menu will activate or deactivate motion detection on all cameras. 

Selecting 

Individual Enable

 will bring up a menu enabling you to enable or disable motion detection on an 

individual basis.

Advanced Menu/ Motion Detection/Setup Parameters

Use this menu to select the 

Camera

, 

Motion Detection Type

, and 

Sensitivity

 of the motion detection.

Summary of Contents for SymDec 4



























































































Reviews:

No comments