GE PanaFlow MV80, User Manual

Page: 80 / 164

Chapter 3. Operating Instructions
68 PanaFlow™ MV80 & MV82 User’s Manual
3.3.11 The Time & Date Menu
Use the Time and Date Menu (see Figure 63 below) to enter the correct time and date into the flowmeter's memory.
The parameters are used in the Run Mode and the alarm and system log files.
Note:
Time is displayed in AM/PM format, but military format is used to set the time. For example, 1:00 PM is
entered as 13:00:00 in the Set Time menu.
This example shows how to set the time to 12:00:00. You can check the time in Run Mode by pressing the keys
until the Time & Date screen appears.
Note:
All outputs are disabled while using the Setup Menus.
1. Use keys to move to the Time and Date Menu.
2. Press the key until Set Time appears. Press
ENTER
.
3. Press the key until 1 appears. Press the key to move the underline cursor to the next digit. Press the key
until 2 appears. Continue sequence until all desired parameters are entered. Press
ENTER
to return to the Time
and Date Menu.
4. Press
EXIT
to return to Run Mode.
Figure 63: The Time & Date Menu
Set Time
xx:xx:xx
Menu
Password
ENTER
ENTER
Use
keys to access menus
Run Mode
Set Date
xx/xx/xx