GE Optica, Operator'S Manual

Page: 85 / 150

January 2006
5-4 Programming the 4x40 Optica
Programmable Functions
Analog Outputs
Communication
Parameters
Table 5-2: Analog Output Options
Setting Description Available Options
Output A Parameter
Choose which parameter will be
output on analog channel A. Humidity, Temperature, Pressure or
User Equation
Output A Units
Choose the units for scaling this
parameter. See Table 4-1 on page 4-4 for the
parameter chosen.
Output A Upper
Set the parameter value that will
produce full-scale output.
Enter a number.
Output A Lower
Set the parameter value that will
produce zero output.
Enter a number.
Output B Parameter
Choose which parameter will be
output on analog channel A. Humidity, Temperature, Pressure or
User Equation
Output B Units
Choose the units for scaling this
parameter. See Table 4-1 on page 4-4 for the
parameter chosen.
Output B Upper
Set the parameter value that will
produce full-scale output.
Enter a number.
Output B Lower
Set the parameter value that will
produce zero output.
Enter a number.
Table 5-3: Communication Parameter Options
Setting Description Available Options
Serial Mode
Set whether data is transmitted
continuously or on demand. All, Query (see Query Mode Format on
page 4-17)
Baud
Set the baud rate to be compatible
with the receiving device. 300, 1200, 2400, 4800, 9600, 19200,
38400, 57600
Parity
Set the parity as required by the
receiving device.
None, Odd, Even, Mark or Space
Number of Data Bits
Set the number of data bits as
required by the receiving device.
7 or 8
Number of Stop Bits
Set the number of stop bits as required
by the receiving device.
1, 1.5 or 2
Serial Flow Control
Set the flow control as required by the
receiving device.
None, Software, Hardware