GE Multilin F650, User Manual

Page: 78 / 323

3-12 F650 Digital Bay Controller GEK-106310AE
3.1 ENERVISTA 650 SETUP SOFTWARE INTERFACE 3 HUMAN INTERFACES. SETTINGS & ACTUAL VALUES
3
3.1.7.1 NEW, OPEN, SAVE, SAVE AS AND CLOSE
In these options, the program opens a dialog box (with default path to Files>Config program folder) where the setting and
configuration files can be selected for their "off-line" edition. For enabling access to this menu, there must be no
communication between the PC program and the relay.
Figure 3–5: OPEN FILE MENU
Once the *.650 file with the appropriated relay model (FXGX) is selected, the program will enable the off-line options to fully
program the unit. The enabled menus in the EnerVista 650 Setup program are: File, Setpoint, Actual, Communication, View
and Help.
The off-line mode displays the File, Setpoint, Actual, Communication, Security, View and Help submenus to program the
unit.
The Actual values submenus are for structure purposes only Values are not refreshed while the relay is not communicating.
The "Save as" and "Close" submenus are used to save the *.650 file into the computer and to close the current file. To work
in off line mode for settings and configuration edition it is not necessary to use the "Close" option, a new *.650 can be
opened without closing the previous one. The "Close" option is used to clear all data in EnerVista 650 Setup program,
enabling "Language", "Upgrade firmware version" and "Upgrade Operating system" options.