GE Multilin F650, User Manual

Page: 294 / 323

GEK-113000AE F650 Digital Bay Controller D-13
APPENDIX D D.1 FACTORY DEFAULT SETTINGS
D
SETPOINT > PRODUCT SETUP > TIME SETTINGS
SETTING DESCRIPTION NAME DEFAULT VALUE STEP RANGE
USER
VALUE
Local time zone offset Universal
Coodinated Time LOC. TIME OFFS.
UTC
0 1 [-24,0 : 24,0]
To follow DST rules
DAYLIG. SAVINGS
TIME
DISABLED NA [DISBLED; ENABLED]
Set the start month of the DST
DST START
MONTH
MAR MONTH January to December
Set the start weekday of the DST
DST START
WEEKDAY
SUNDAY DAY Monday to Sunday
Set the start day instance
DST START DAY
INST
LAST NA
First; Second; Third;
Fourth; Last
Set the starting hour of the DST DST START HOUR 2 1 [0 : 23]
Set the Stop month of the DST DST STOP MONTH OCT Month January to December
Set the stop weekday of the DST
DST STOP
WEEKDAY
SUNDAY Day Monday to Sunday
Set the stop day instance
DST STOP DAY
INST
LAST NA
First; Second; Third;
Fourth; Last
Set the stop hour of the DST DST STOP HOUR 2 1 [0 : 23]
IRIG-B local time IRIG-B LOCAL TIME OFF NA [ON; OFF]
Function permission IRIGB Function DISABLED NA ENABLLED; DISABLED
Stablish the sync priority PTP IRIGB Priority PTP-1588 NA PTP-1588; IRIG_B
SETPOINT > SYSTEM SETUP > GENERAL SETTINGS
SETTING DESCRIPTION NAME DEFAULT VALUE STEP RANGE
USER
VALUE
Phase CT ratio Phase CT Ratio 1.0 0.1 [1.0 : 6000.0]
Ground CT ratio Ground CT Ratio 1.0 0.1 [1.0 : 6000.0]
Sensitive ground CT ratio Stv Ground CT Ratio 1.0 0.1 [1.0 : 6000.0]
Phase VT ratio Phase VT Ratio 1.0 0.1 [1.0 : 6000.0]
Phase VT connection Phase VT Connection WYE N/A [WYE – DELTA]
Rated voltage Nominal Voltage 100.0 0.1 [1.0 : 250.0]
Rated Frequency Nominal Frequency 50 Hz Hz [50-60]
Phase rotation Phase Rotation ABC N/A [ABC – ACB]
Frequency reference Frequency Reference VI N/A [VI-VII-VIII]
Auxiliary Voltage Auxiliary Voltage VX N/A [VX – VN]
Snapshot Event generation Snapshot Events DISABLED N/A [DISABLED – ENABLED]
Primary meter units Primary meter units kA_kV NA A_V; kA_kV
Device name Device name NA NA NA
SETPOINT > SYSTEM SETUP > FLEX CURVES
FLEX CURVES A > FLEX CURVES B> FLEX CURVES C > FLEX CURVES D
SETTING DESCRIPTION NAME DEFAULT VALUE STEP RANGE
USER
VALUE
Values for reset points 0.00 pkp Time 0.00xPKP [RST] 0.000 0.001 s [0.000 : 65.535]
Values for reset points 0.05 pkp Time 0.05xPKP [RST] 0.000 0.001 s [0.000 : 65.535]
… … … 0.001 s [0.000 : 65.535]
Values for reset points 0.97 pkp Time 0.97xPKP [RST] 0.000 0.001 s [0.000 : 65.535]
Values for reset points 0.98 pkp Time 0.98xPKP [RST] 0.000 0.001 s [0.000 : 65.535]
Values for operation points 1.03 pkp Time 1.03xPKP [OP] 0.000 0.001 s [0.000 : 65.535]