GE Moisture Image 1 Series, Programming Manual

Page: 53 / 125

June 2003
2-34 Basic Programming
Manually or
Automatically Scrolling
Through Pages
You can set the Series 1 to automatically scroll through each page or
enable you to scroll through each page manually. Use the appropriate
section below to set up the scrolling procedure.
Figure 3-18 on page 3-31 for a menu map.
1. At the Main Menu, press the SELECT menu key. You are now in
the Select Menu.
2. Press the PAGE menu key. At the Display Page # prompt, enter
the page number and press [YES].
3. At the Main Menu, press the OPTIONS menu key.
4. Press the SCREEN menu key.
5. Press the CYCLE menu key.
6. Enter an interval between 0 and 5 minutes and press [YES].
Note: Enter 0:00 to turn the automatic scroll off.
7. Press the DONE menu key until Main Menu appears on the
message line.
After you enter the interval, the Series 1 begins scrolling through each
page. It will automatically skip over pages that consist of all
unassigned boxes.
Note:
When you press the SELECT menu key, the meter suspends
the automatic page scrolling so you can make changes to the
screen. It will automatically begin scrolling when you return
to the Main Menu.