GE Moisture Image 1 Series, Programming Manual

Page: 20 / 125

Basic Programming 2-1
June 2003
Introduction
The Moisture Image Series 1 is a highly advanced and versatile
instrument. Because of this, operation ranges from basic to advanced
functions. This section is designed to provide a step-by-step guide to
basic operations. For information on other functions, refer to Chapter
3, Advanced Programming.
IMPORTANT:
You must install a switch or circuit breaker on the
input power line. For greatest safety, locate the
circuit breaker or power switch near the electronics
console. To comply with the Low Voltage Directive,
you must install an external current protection
device.
The following sections cover basic programming functions:
•
Getting Started - describes how to power up, gives a description of
the user program, and explains how to obtain on-line help.
•
Verifying Setup Data - describes how to verify and, if necessary,
enter setup data for moisture, pressure, oxygen, and any other input
devices.
•
Displaying Measurements - explains how to display measurements
using different screen formats.
•
Adjusting the Contrast of the Screen - explains how to adjust the
screen for optimal viewing.
•
Setting the Clock and Calendar - explains how to set the internal
clock and calendar.
Note:
Because they are so essential, the instructions covered in the
Getting Started, Verifying and Entering Setup Data and
Displaying Measurements sections are also included in the
Startup Guide. If you have read this material, you may skip
those sections of this chapter.