3–20
350 FEEDER PROTECTION SYSTEM – INSTRUCTION MANUAL
SOFTWARE SETUP
CHAPTER 3: INTERFACES
1.
In the files pane, right-click on
Files
and select the
Add Existing Setting File
item as
shown:
2.
The Open dialog box will appear, prompting the user to select a previously saved
setpoint file. As for any other MS Windows® application, browse for the file to be
added then click
Open
. The new file and complete path will be added to the file list.
Creating a new
setpoint file
The EnerVista SR3 Setup software allows the user to create new setpoint files independent
of a connected device. These can be uploaded to a relay at a later date. The following
procedure illustrates how to create new setpoint files.
1.
In the File pane, right click on
File
and select the
New Settings File
item. The following
box will appear, allowing for the configuration of the setpoint file for the correct
firmware version. It is important to define the correct firmware version to ensure that
setpoints not available in a particular version are not downloaded into the relay.
