GE MiCOM P747 Agile, Technical Manual

Page: 177 / 458

2.2.6 PROTECTION EVENTS
The IED logs protection starts and trips as individual events. Protection events are special types of standard
events.
The event type description shown in the Event Text cell for this type of event is dependent on the protection
event that occurred. Each time a protection event occurs, a DDB signal changes state. It is the name of this
DDB signal followed by 'ON' or 'OFF' that appears in the
Event Text cell.
The Event Value cell for this type of event is a 32 bit binary string representing the state of the relevant DDB
signals. These binary strings can also be viewed in the COMMISSION TESTS column in the relevant DDB
batch cells.
Not all DDB signals can generate an event. Those that can are listed in the RECORD CONTROL column. In
this column, you can set which DDBs generate events.
2.2.7 SECURITY EVENTS
An event record is generated each time a setting that requires an access level is executed.
The event type description shown in the Event Text cell displays the type of change. These are as follows:
Event Value Event Text Description
0 User Logged In A user has logged in
1 User Logged Out A user has logged out
2 P/Word Set Blank A blank password has been set
3 P/Word Not NERC The password is not NERC compliant
4 Password Changed The password has changed
5 Password Blocked The password has been blocked
6 P/Word Unblocked The password has been unblocked
7 P/W Ent When Blk The password has been entered while it is blocked
8 Inval PW Entered An invalid password has been entered
9 P/Word Timed Out The password has timed out
10 Rcvy P/W Entered The recovery password has been entered
11 IED Sec Code Rd The IED security code has been read
12 IED Sec Code Exp The IED security code timer has expired
13 Port Disabled A port has been disabled
14 Port Enabled A port has been enabled
15 Def Dsp Not NERC The default display is not NERC compliant
16 PSL Stng D/Load PSL settings have been downloaded to the IED
17 DNP Stng D/Load DNP settings have been downloaded to the IED
18 Trace Dat D/Load Trace Data has been downloaded to the IED
19 IED Confg D/Load A configuration file has been downloaded to the IED
20 User Crv D/Load A user curve has been downloaded to the IED
21 Setng Grp D/Load A settings group has been downloaded to the IED
22 DR Settng D/Load
A Disturbance Recorder setting has been downloaded to the
IED
23 PSL Stng Upload PSL settings have been uploaded from the IED
24 DNP Stng Upload DNP settings have been uploaded from the IED
25 Trace Dat Upload Trace Data has been uploaded from the IED
26 IED Confg Upload A configuration file has been uploaded from the IED
27 User Crv Upload A user curve has been uploaded from the IED
MiCOM P747 Chapter 6 - Monitoring and Control
P747-TM-EN-1 157
P747-TM-EN-1.1