GE MDS iNET 900, Reference Manual

Page: 27 / 188

05-2806A01, Rev. J iNET Series Reference Manual 17
1.6 ACCESSORIES
Table 1-4 lists common accessories and spare items for the transceiver.
GE MDS also offers an
Accessories Selection Guide listing an array of
additional items that may be used with the product. Contact your factory
representative or visit
www.gemds.com
to obtain a copy of the guide.
Unprotected access to configuration via
SNMPv1
•
Implement SNMPv3 secure
operation
Intrusion detection
•
Provides early warning via SNMP
through critical event reports
(unauthorized, logging attempts,
etc.)
•
Unauthorized AP MAC address
detected at Remote
•
Unauthorized Remote MAC
address detected at AP
•
Login attempt limit exceeded
(Accessed via: Telnet, HTTP, or
local)
•
Successful login/logout
(Accessed via: Telnet, HTTP, or
local)
Table 1-3. Security Risk Management
Security Vulnerability GE MDS Cyber Security Solution
Table 1-4. Accessories
Accessory Description Part No.
AC Power
Adapter Kit A small power supply module designed for
continuous service. UL approved. Input:
120/220; Output: 13.8 Vdc @ 2.5 A 01-3682A02
Omni-
Directional
Antennas Rugged antennas well suited for use at Access
Point installations. Consult with your factory
Sales Representative for details Call factory
Yagi Antenna
(Directional) Rugged antennas well suited for use at Remote
installations. Consult with your factory Sales
Representative for details. Call factory
TNC Male-to-N
Female Adapter One-piece RF adaptor plug. 97-1677A161
TNC Male-to-N
Female Adapter
Cable Short length of coaxial cable used to connect
the radio’s TNC antenna connector to a Type N
commonly used on large diameter coaxial
cables. 97-1677A159
(3 ft./1m)
97-1677A160
(6 ft./1.8m)
Ethernet RJ-45
Crossover
Cable (CAT5) Cable assembly used to cross-connect the
Ethernet ports of two transceivers used in a
repeater configuration.
(Cable length
≈
3 ft./1M)
97-1870A21
2-Pin Power
Plug Mates with power connector on transceiver.
Screw terminals provided for wires, threaded
locking screws to prevent accidental disconnect. 73-1194A39