GE MDS iNET 900, Reference Manual

Page: 108 / 188

98 iNET Series Reference Manual 05-2806A01, Rev. J
2.8.8 Serial Data Statistics Menu
This screen provides a summary of port activity for both serial data
ports. These values will be reset to zero after a reboot cycle.
Figure 2-61. Serial Data Statistics Screen
(Both COM1 and COM2 will be shown)
•
Bytes in on port
— Number of bytes received by the transceiver
through the serial interface
•
Bytes out on port
— Number of bytes transmitted by the trans-
ceiver through the serial interface
•
Bytes in on socket
— Number of bytes received by the trans-
ceiver through the IP socket
•
Bytes out on socket
— Number of bytes transmitted by the trans-
ceiver through the IP socket
In general, the number of bytes
Out on Socket
should follow
the number of bytes
In On Port
as all bytes received on the
serial port should be transmitted out to the IP interface. The
same should be true in the opposite direction, bytes
Out On
Port
should follow bytes
In On Socket
.
•
Clear Com1 Statistics
—Resets counter to zero.
•
Clear Com2 Statistics
—Resets counter to zero.
2.9 MAINTENANCE
In the normal course of operating a wireless network, you will want to
take advantage of product improvements, and to read and archive the
configuration of your individual transceivers using the
Maintenance
Menu . This section provides detailed information on how to take advan-
tage of these services.
The maintenance tasks are: