manualshive.com logo in svg

GE MDS iNET 900, Reference Manual

The GE MDS iNET 900 Reference Manual is the go-to resource for mastering the powerful features and functions of this advanced product. Seamlessly download this comprehensive manual for free from manualshive.com, empowering you to maximize your understanding and optimize your experience with the GE MDS iNET 900.

Share
Download
background image

 

05-2806A01, Rev. J

iNET Series Reference Manual

iii

 

TCP vs. UDP..................................................................................................................................61
Serial Encapsulation ......................................................................................................................62
TCP Client vs. TCP Server ............................................................................................................62
UDP Multicast ................................................................................................................................62
PPP................................................................................................................................................63
Data Buffering ................................................................................................................................63
Implementing Configuration Changes............................................................................................63
Serial Configuration Wizard ...........................................................................................................63

2.6.2   Serial Data Port Configuration Menu ........................................................................................64
2.6.3   Configuring for UDP Mode  .......................................................................................................65
2.6.4   Configuring for TCP Mode ........................................................................................................68
2.6.5   Configuring for PPP Mode ........................................................................................................71
2.6.6   IP-to-Serial Application Example  ..............................................................................................72
2.6.7   Point-to-Multipoint IP-to-Serial Application Example  ................................................................73
2.6.8   Point-to-Point Serial-to-Serial Application Example  .................................................................74
2.6.9   Combined Serial and IP Application Example  ..........................................................................75

Operation and Data Flow ...............................................................................................................76

2.6.10    Virtual LAN in iNET-II and iNET .............................................................................................77

 

2.7   CYBER SECURITY CONFIGURATION ............................................................................. 77

 

2.7.1   Device Security  ........................................................................................................................78
2.7.2   Wireless Security ......................................................................................................................79

Local Authentication Approved Remotes/Access Points List Submenu......................................80

2.7.3   RADIUS Configuration  .............................................................................................................81

Operation of Device Authentication................................................................................................82
Operation of User Authentication ...................................................................................................82

2.7.4   RADIUS Configuration  .............................................................................................................83
2.7.5   Certificate Management (Remote transceivers only)  ...............................................................83

 

2.8   PERFORMANCE VERIFICATION ...................................................................................... 84

 

2.8.1   RSSI by Zone Menu (Remotes Only) .......................................................................................86
2.8.2   Event Log Menu  .......................................................................................................................87

Time and Date................................................................................................................................87
View Current Alarms ......................................................................................................................89
View Event Log ..............................................................................................................................90

2.8.3   Packet Statistics Menu  .............................................................................................................90

Wireless Packet Statistics..............................................................................................................90
Ethernet Packet Statistics ..............................................................................................................91
Packets Received by Zone ............................................................................................................92

2.8.4   Wireless Network Status (Remotes Only)  ................................................................................93

 

The Transceiver’s Association Process

 

..........................................................................................93

The Wireless Network Status Screen (Remotes Only) ..................................................................94

2.8.5   Remote Listing Menu (Access Points Only)   ............................................................................95
2.8.6   Endpoint Listing Menu (Access Points Only)  ...........................................................................96
2.8.7   Remote Performance Listing Menu 
(Access Points Only)   ..........................................................................................................................97
2.8.8   Serial Data Statistics Menu  ......................................................................................................98

Summary of Contents for MDS iNET 900





























































































































































































Reviews:

No comments

Related manuals for MDS iNET 900

iDirect 3000 series Installation And Safety Manual preview
3000 series
Brand: iDirect Pages: 82
Hallicrafters SX25 Operating And Service Instructions preview
SX25
Brand: Hallicrafters Pages: 8
Yaesu FT-200 Instruction Manual preview
FT-200
Brand: Yaesu Pages: 34
Yaesu FT-200 User Manual preview
FT-200
Brand: Yaesu Pages: 26
Yaesu FT-8800 Programming Manual preview
FT-8800
Brand: Yaesu Pages: 2
Yaesu FT-8800 Reference preview
FT-8800
Brand: Yaesu Pages: 22
Yaesu FT-1000 Operating Manual preview
FT-1000
Brand: Yaesu Pages: 68
Shure ADX2 User Manual preview
ADX2
Brand: Shure Pages: 24
Qixiang Electron Science & Technology T4K-5888UV User Manual preview
T4K-5888UV
Brand: Qixiang Electron Science & Technology Pages: 45
Xantech Micro Link 49085D Installation Instructions preview
Micro Link 49085D
Brand: Xantech Pages: 4
MIRPO MR-515 Instruction Manual preview
MR-515
Brand: MIRPO Pages: 8
GE HygroTrace User Manual preview
HygroTrace
Brand: GE Pages: 40
Sansui QRX-4500 Operating Instructions & Service Manual preview
QRX-4500
Brand: Sansui Pages: 50
XRadio DX-100 Series User Manual preview
DX-100 Series
Brand: XRadio Pages: 29
Yaesu FT-277R Manual preview
FT-277R
Brand: Yaesu Pages: 34
G&D NEO-FiberLink-2 Installation Manual preview
NEO-FiberLink-2
Brand: G&D Pages: 32
Laird Command Pro SAFE-T-RANGE User Manual preview
Command Pro SAFE-T-RANGE
Brand: Laird Pages: 45
Columbus P-7 Pro Quick Start preview
P-7 Pro
Brand: Columbus Pages: 3

Brands by name

Popular brands

Load more brands