GE MDS iNET 900, Reference Manual, Page: 81 / 188

05-2806A01, Rev. J iNET Series Reference Manual 71
•
Seamless Inter-Frame Delay
— Number of characters that repre-
sent the end of a message (inter-character time-out). MOD-
BUS defines a “3.5-character” parameter. [
1–65,535; 4
]
•
Custom Data Buffer Size
(Custom Packet Mode only)—Maxi-
mum amount of characters, that the Remote end will buffer
locally before starting to transmit data through the serial port.
[
16, 32, 64, 128, 256; 32
]
•
Commit Changes and Exit Wizard
—Save and execute changes
made on this screen (Shown only after changes have been
entered.)
2.6.5 Configuring for PPP Mode
Invisible place holder
Figure 2-36. PPP Menu
•
Status
—Enable/Disable the serial data port.
•
IP Protocol
—PPP. This is the type of IP port that will be offered
by the transceiver’s serial device server. [
TCP, UDP, PPP; TCP
]
•
Device IP Address
—IP address that will be assigned to the dialing
device once the connection is established. [
0.0.0.0
]
•
Data Baud
—The baud rate of the serial port of the transceiver to
which the external device is connected.
[
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200; 19200
]
•
Con fi guration
—Byte format of the serial port
[
7N1, 7E1, 701, 7N2, 7E2, 702, 8N1, 801, 8N2, 8E2, 802; 8N1
]
•
Flow Control
(COM2 only)—RTS/CTS handshaking between the
transceiver and the connected device.
[
Enable, Disable; Disabled
]
•
Serial Mode
—When seamless mode is selected, data bytes will be
sent over the air as quickly as possible, but the receiver will
buffer the data until enough bytes have arrived to cover worst
case gaps in transmission. The delay introduced by data buffer-