3-15
Panda iRes Warmer
M1110737 006
© 2007 General Electric Company, all rights reserved
Raising and lowering the bed
WARNING:
Before raising or lowering the bed, check that there is adequate slack in tubing and leads
and that no obstructions limit the range of motion.
CAUTION
Objects placed on the warmer legs may be damaged by raising or lowering the bed and
could create a tripping hazard.
Illustration
Step
1
If the unit is equipped with an elevating
base, the bed can be raised or lowered
using the bed height pedals located on
the legs on either side of the warmer. The
bed height can be adjusted low enough for
use by a seated caregiver, or can be raised
high enough for procedures performed by
standing caregivers.
Fixed height bed models can be adjusted
by following the instructions found in the
service manual.
WARNING:
Do not attempt to adjust the fixed
base while a patient is in the bed.
After adjustments to the fixed base
height have been made, ensure the
fixed base is locked in place before
placing a patient in the bed.
