GE Giraffe Operation And Maintenance Manual Download

Page: 22 / 90

Panda iRes Warmer

M1110737 006

1-12

Trends

The warmer trends temperature, and SpO2 (optional). Push “

Menu

” key then the “

Trends

” key to

display the trending screens.

Temperature trending

Screen

Step

Description

Push the “

Temp

” key to view a graph of

set temperatures, baby temperatures and

heater output. Manual Mode graphs show

percentage of power and baby tempera

tures. If a probe is attached to the baby,

Baby Mode graphs display set temperatures,

baby temperatures and heater output.

Push the “

Time Scale

” key to change the

time period shown on the graph from the

default 15 minutes to 30 minutes,

or 60 minutes.

SpO

trending (with SpO

option installed)

Screen

Step

Description

Push the “

SpO

” key to view a graph

that plots both the baby’s blood oxygen

saturation percentage and the baby’s pulse

rate.

Note

: the “

SpO

” key only appears on the

display if the SpO

option is installed.

Push the “

Time Scale

” key to change the

time period shown on the graph from the

default 15 minutes to 30 minutes, or to 60

minutes.

Push the “

Back

” key to return to the trending

screen and the “

Exit

” key to return to the

Home Screen.

Summary of Contents for Giraffe


















































































Search results

Summary of Contents for Giraffe

Reviews:

Related manuals for Giraffe

Brands by name

Popular brands

GE Giraffe, Operation And Maintenance Manual

Search results

Summary of Contents for Giraffe

Reviews:

Related manuals for Giraffe

Brands by name

Popular brands