GE Fuji Electric MICRO-SAVER AF-300, Instructions Manual

Page: 30 / 78

TABLE 5: Terminal Identification/Function (continued)
Terminal Terminal
Label Name Function
Control minal Board
FMA Analog Frequency
Meter Connection
Points
FMP
3 0 A
3 0 B
3oc
Xl -x3
RUN
NC
Frequency
Meter
Fault Relay Output
Terminals
Multi-step Input
Function Selection
Deceleration Time
Setting
Output Function
Unused Terminals
Provides an output of 0 to at max frequency )
for Connection of a voltmeter (with internal resistance of
1 OK ohms.) See Function Code 46 for monitoring selection. Meter
connects between terminal FMA
Pulse frequency output equal to Drive output frequency -1440 Hz at
max. frequency. Meter connects between FMP and CM. (Pulse voltage.
Peak
50% duty.)
normal operation, the relay
IS
not energized and contact
IS
made
between 30B and 30C. When a fault
IS
detected, the relay
IS
energized
and contact
IS
made between 30A and 30C. (Contact rating resistive
load: 250 0.3 Amps.)
Seven preset selections F-43 = 0
time
IS
selected when -CM is
closed. When not closed setting
IS
activated.
(F-43=1) 8 additional frequencies can be selected by X2, X3 and
Drive running (open collector output, 20 ma or less)
Do not connect anything to terminal
4-9