GE Fuji Electric MICRO-SAVER AF-300, Instructions Manual

Page: 2 / 78

General Information Drive Instructions
These instructions do not purport to cover all or variations equipment, nor to for
every possible contingency to be met during installation, operation, and maintenance. Should
further information be desired or should particular problems arise that are not covered sufficiently for
the purchaser’s purpose, the matter should be referred to GE Motors
Systems, Cus-
tomer Service.
This document contains proprietary information of General Company, USA and is furnished
to customers solely to assist that customer in the installation, testing, and/or maintenance of the
equipment described. document shall not be reproduced in whole or part nor shall its
contents be to any third party without the written approval of GE Motors Industrial
Systems, Fort Wayne, IN.
NOTE: The terms “controller”, and are sometimes used throughout
the industry. We will use the term “Drive” in thrs document.
AF-300 and are trademarks of General Electric Company
Energy
IS
a registered trademark of General Electric Company.
The terms “AF-300 and be used Interchangeably throughout
this document.
WARNING:
Always read the complete instructions
priortoapplyingpowerortroubleshootingtheequipment
and follow all procedures step by step.
SHOCK
labels may be located on or inside the Drive to alert people that dangerous
voltage may be present. (Refer to Section Safety Precautions for Warnings and Cautions.)
Blank Space has been left at the bottom of each page for the convenience of the user
documenting notes.
Copyright 1995 by General Electric Company, USA.
i