GE Fuji Electric MICRO-SAVER AF-300, Instructions Manual

Page: 73 / 78

Section
9
WARRANTY -PARTS AND SERVICE
The purpose of the
IS
to provide
to the user of
Drive regarding warranty administration and
how to assistance on both in-warranty and
of-warranty equipment.
For all procedures, refer to Section 8
of Instruction Book. To identify the part or assem-
bly use the noted troubleshooting procedures in Sec-
tion 8 and the information on page 9-2.
If assistance is required to determine warranty
status or identify defective parts call.
GE Company
Salem, VA
(540) 387-7595
(8 AM to 5 PM EST, Mon. thru Fri.)
(540) 387-8080 (24 Emergency Only)
WARRANTY COVERAGE
The Warranty set forth Section of FN-1090
of GE’s Condition of Sale covers all major parts of the
such as the circuit boards,
tor modules, etc. The warranty covers replacement of
the
Drive
“Warranty
IS
12 months after installation or 18
months after shipment from the Company, whichever
occurs first
Before calling the number at left to determine warranty
status, the Drive serial number be required. This
IS
located on the nameplate If the Drive
IS
still
under warranty, further information will be required
per the “In-Warranty Failure Checklist” shown on
page 9-2 of
Instructron Book.
OUT-OF-WARRANTY PROCEDURES
When the part has been contact
your local Authorized
AF-300
to order replacement parts.
MOTORS
Motor repairs on General Electric motors are gener-
ally handled by GE Authorized Electric Motor
centers or GE Apparatus Service Shops For specific
on your motor, call the distributor from
which it was purchased and be prepared to furnish
complete nameplate data.
9-l