GE EPM 7300, Installation Manual, Page: 76 / 304

68 PMCS Interface Toolkit
POWER LEADER EPM
The large faceplate representation of the POWER LEADER EPM provides the
following animated functions:
Click on... Function
Display Window Clicking on the display area opens the tabular data window
specified during wizard configuration and sets the view to
the Normal Metering page.
GE Logo Clicking the GE logo opens the tabular data window
specified during wizard configuration and sets the view to
the Setup page.
SELECT/ENTER
Button Toggles the display between the normal and alternate lists
of metering parameters.
SCROLL Buttons Loop through all metered parameters for the current mode,
displaying two values at a time. The down arrow scrolls
down through the parameter list, with the new value
appearing on the lower line of the display. The up arrow
scrolls up through the parameter list with the new value
appearing on the display’s upper line. Depending on
whether the EPM has been configured as a Delta or Wye
device, certain parameters display either line-to-line or
line-to-neutral values.
Table 1. PLEPM Faceplate animated functions.
The electrical parameters and status information displayed by the EPM are listed
below for both the normal and alternate scrolls. Note that the displayed parameters