GE eBike BASIC, Service Manual

Page: 56 / 234

- 56 - eBike II, eBike II L, eBike II EL 2018112-069 Rev. F
a
lIgnMent
„o
uput
: a
nalog
l
oad value
“
The output voltage representing a special load value of the
ergometer is defined with this setting.
It is possible to adjust the voltage and / or the load value.
Select the parameter by use of the arrow keys and confirm
with „Enter“
Adjust the value by using the arrow keys and store the
setting with SET.
Setting range:
GAIN
:(voltage) 20 mV to 10000 mV in steps of 2 mV
GAIN
(load) 20 to 999 Watt in steps of 10 Watt
a
lIgnMent
„o
utput
: a
nalog
H
eartrate
“
The output voltage representing a special heartrate is
defined with this setting.
It is possible to adjust the voltage and / or the heartrate
value.
The setting is performed as described above under
Alignment „Ouput: Analog Load value“
Setting range:
GAIN
(voltage): 500 to 2000 mV in
2 mV steps
GAIN
(heartrate): 50 to 250 bpm in
10 bpm steps
a
lIgnMent
„o
uput
: a
nalog
s
ystole
“
The output voltage representing the systolic value is
defined with this setting.
It is possible to adjust the voltage and / or the systolic
value.
The setting is performed as described above under
Alignment „Ouput: Analog Load value“
Setting range:
GAIN
(voltage): 500 to 2000 mV in
2 mV steps
GAIN
(systole): 50 to 250 mmHg in
5 mmHg steps
OUTPUT 2 Heart
GAIN 1000 mV
GAIN 100
♥
ENTER
OUTPUT 3 Systole
GAIN 1000 mV
GAIN 100 mmHg
ENTER
a
lignMent of analog output
„
load
“
OUTPUT 1 Load
GAIN 3000 mV
GAIN 300 Watt
ENTER
OUTPUT 1 Load
GAIN 3000 mV
GAIN 300 Watt
SET