GE eBike BASIC Service Manual Download Page 223

Page: 223 / 234

2018112-069 Rev. E

eBike II, eBike II L, eBike II EL

- 223 -

eBike II L / EL - uncrating instructions

- 217 -

astors

mountinG

• Turn the eBike L / EL 90° on the palett.

The corners of the base frame should overlap on

both sides.

• Screw all 4 double castors into the base frame

using the included Allen key and tighten them

carefully.

• Lift the eBike L / EL at the bottom end, shift it

onto the castors and position it on the floor.

Remove the palett with the cardboard.

- 216 -

eBike II L / EL - uncrating instructions

• Cut and remove the tapes fixing the 2nd

accessories box.

This box contains:

- 4 double castors with mounting screws

and Allen key

- outrigger (eBike EL only)

- paper rol holder

emove

transPort

sCrews

• 4 screws are fixing the eBike L / EL on the palett.

• Unscrew all 4 screws with a wrench

(17 mm - metric).

Summary of Contents for eBike BASIC











































































































































































































































Search results

Summary of Contents for eBike BASIC

Reviews:

Related manuals for eBike BASIC

Brands by name

Popular brands

GE eBike BASIC, Service Manual

Search results

Summary of Contents for eBike BASIC

Reviews:

Related manuals for eBike BASIC

Brands by name

Popular brands