2018112-069 Rev. E
eBike II, eBike II L, eBike II EL
- 231 -
eBike II L / EL - uncrating instructions
- 225 -
hexagon socket screw
washer
spacing plate
special thread washer
• Install the two leg rests in the plug-in devices.
- 224 -
eBike II L / EL - uncrating instructions
• Mount the leg rest holder into the bore holes of
the sqare tubing in the swivel section, beneath
the couch surface.
• Insert the appropriate hexagon socket screws
(M8x50 for eBike L / M8x70 for eBike EL) with
washers from top to bottom into the bore holes.
Make sure that the screws do not sqeeze the
microphone cable and silicon tubing already in
place.
• Place a spacing plate onto the screws, the short
end pointing to the inside towards the padding,
and secure it with the special thread washers.
• Holding the thread washers carefully, e.g. with
a pipe wrench, tighten the four hexagon socket
screws with a short Allen key.
Summary of Contents for eBike BASIC
