GE DGP Series, Instruction Manual

Page: 244 / 278

10-
2
DGP Digital Generator Protection System GE Power Management
10.2 GENERAL OPERATION 10 GE-LINK SOFTWARE
10
10.2 GENERAL OPERATION 10.2.1 PROTECTION JUMPERS
In order to have complete remote control of the unit, the factory-installed jumpers J1 and J2 of the MMI module
must be removed. Installing J1 disables remote closing of all of the output relays. Installing J2 disables all
remote setting changes and the disable/enable of outputs (see Figure 3–4: DGP MMI MODULE on page 3–5).
10.2.2 GE-LINK USER INTERFACE
All user actions are classified into these categories.
• Adding/Modifying/Deleting a Site (Location).
• Adding/Modifying/Deleting an IED.
• Modes of operation.
• Connecting to and disconnecting to an IED.
• Retrieving information from an IED.
• Read/Send setting changes from/to IED.
• Send control commands to IED.
• Copy/Paste/Print Settings.
10.2.3 ADDING/MODIFYING A SITE (LOCATION)
The diagram below shows how to add a new Location.
After adding, click the Save button to save the site in the database. To modify the properties of the site, click on
the site and change the name / description and then click the Save button.
S ite P rop erties
C lick on this bu tton to ad d a new site , or
item m en u the select F ile > A d d N ew L o catio n