Revision History
Definium AMX 700 X-Ray System
5161515-1EN
Rev. 6 (10 February 2008)
iii
Operator Manual
© 2008 General Electric Company. All rights reserved.
Revision History
Rev
#
Date
Pages
Affected
Reason for Change
1
09 Dec. 2005
All
Initial release.
2
27 Mar. 2006
1-1
Updated description of unit.
2-5
Inserted warning about inserting fingers into the Ethernet port.
3-2
Added cross-references in table 3-1.
Added wireless antenna information in table 3-1.
3-3
Added cross-references in table 3-1.
3-4
Added notes and information about the detector bin in table 3-1.
3-5
Inserted warning about inserting fingers into the Ethernet port in table 3-1.
5-3
Procedure re-written (all text before figure 5-2).
6-3
Battery drain percentages revised, figure 6-2 replaced.
6-4
Removed note before “Bar Graph Display vs. Battery Loading” section
Updated Approximate Discharge Rate and Typical Daily Usage numbers in table
6-2.
6-5
Figure 6-3 replaced.
6-6
Added 2 “IMPORTANT!” notes after step 5.
6-7
Moved “Main Power Circuit Breaker” information from the Maintenance and
Service chapter.
Figure 6-5 replaced.
7-1
Switched order of “Maintenance” and “Messages” chapters.
7-2
Updated descriptions of “Battery Too Low” and “Charge Required” messages in
table 7-1.
8-1
Updated approved cleaning chemical list.
A1-5
Added weight in kilograms caution in Figure A1-3.
A1-6
Updated table A1-2, detector status lights.
A1-7
updated list “Do not do”.
A1-8
Updated external ambient temperature range in table A1-3.
A1-10
Removed references to the grid holder.
A1-11
Added grid handling instructions.
A2-3
Added start up instructions.
A2-7/8
Added wireless network connection section.
A2-9
Added step to system reset procedure (step 3).
A2-11
Removed paragraph before figure A2-10.
A3-6
Added “network connection status” and “wireless network connection status”
rows to table A3-1.
A3-8
Corrected description of Accession number in table A3-2.
A3-9
Corrected first bullet below step 3.
A3-20
Corrected description of Accession number in table A3-4.
FOR
TRAINING
PURPOSES
ONLY!
NOTE:
Once
downloaded,
this
document
is
UNCONTROLLED,
and
therefore
may
not
be
the
latest
revision.
Always
confirm
revision
status
against
a
validated
source
(ie
CDL).
