GE D20MX User Manual Download Page 7

Page: 7 / 146

D20MX HARDWARE USER’S MANUAL

GE INFORMATION

D20MX Processor

About this Document

Purpose

This manual provides information about installing, setting up, using and maintaining your
D20MX

Processor. This manual does not provide any procedures for configuring the

software of the D20MX.

Intended audience

This manual is intended for use by field technicians and maintenance personnel who are
responsible for the installation, wiring and maintenance of SCADA equipment. This manual
assumes that the user is experienced in:
•

Electrical utility applications

•

Electrical wiring and safety procedures

•

Related other manufacturers’ products, such as protective relays and
communications equipment

Additional documentation

For the most current version of the D20MX Hardware User's Manual, please download a
copy from:

http://www.gedigitalenergy.com/app/ViewFiles.aspx?prod=d20mx&type=3

For further information about the D20MX, refer to the following documents.
•

SGConfig

Online Help

•

D20/D200 Installation and Operation Guide, 994-0078

•

Application Configuration Guides and User Guides (available on the D20MX
Documentation CD)

Summary of Contents for D20MX



















































































































































Search results

Summary of Contents for D20MX

Reviews:

Brands by name

Popular brands

GE D20MX, User Manual

Search results

Summary of Contents for D20MX

Reviews:

Brands by name

Popular brands