GE D20MX, User Manual

Page: 121 / 146

APPENDIX D: USING CONFIGPRO WITH D20MX
D20MX HARDWARE USER’S MANUAL GE INFORMATION 121
2.3.4. Confirm that access is allowed by pressing the Enter key a couple of
times.
2.4. Download [sync] the configuration from ConfigPro to the D20MX by pressing
the F7 key on the key board.
2.5. Optionally you can set up the terminal emulator for faster download speed:
2.5.1. Login to the D20MX device through the ConfigPro Terminal Emulator.
Result: The D20M prompt appears.
2.5.2. Type baud 115200 and press Enter .
Result: The D20MX baud rate changes from 19200 to 115200.
2.5.3. Disconnect the D20MX from ConfigPro by selecting Communications >
Disconnect .
2.5.4. Open the communication properties by selecting Device >
Communications > Communications Options….
Result: The Communications Options window appears.
2.5.5. Change the baud rate to match 115200 by selecting the Software
Transmit and Software Receive options and then clicking OK .
2.5.6. Reconnect to and login to the D20MX. See step 2.3 [Connect to the
D20MX device].
2.5.7. Download [sync] the configuration from ConfigPro to the D20MX by
pressing the F7 key.
Result: The Download Configuration File progress bar appears.
2.6. Restart the D20MX device when the download is complete by clicking Boot .