GE AIR F24, Service Manual

Page: 35 / 48

－
35
－
Operating Procedures / Photos
Disassemble Motor Mounting Plate Sub-assy
Use screwdriver to screw off the six screws
at the motor mounting plate to remove the
motor mounting plate sub-assy. (Fig 8-46)
Motor Mounting
Plate Sub-assy
(Fig 8-46)
Tapping Screw
Disassemble Supporting Plate of Motor Support
Use screwdriver to screw off the screws
connecting the supporting plate of motor
support and the rear side plate sub-assy
with the motor support. (Fig 8-47)
Disassemble Left and
Right Mounting Plates
Tapping Screw
(Fig 8-47)
Use tool to remove the bolts (2 X M8, 2 X
M6) fixing the left and right mounting plates.
(Fig 8-48)
Disassemble Motor Support
Use screwdriver to screw off the screws at
the rear support base plate and at the both
sides of the support as shown in the figure
to remove the motor support.
(Fig 8-48)
Right Mounting Plate Bolt
Left Mounting Plate
Tapping Screw
Bolt
(Fig 8-49)