![background image](http://html.mh-extra.com/html/ge/air-f24/air-f24_service-manual_122416034.webp)
-
34
-
Operating Procedures / Photos
Disassemble Mounting Plate
Sub-assy of Swing Motor
Left Side Plate Foam
Sub-assy
Right Side Plate Foam
Sub-assy
Use screwdriver to screw off the screw shown
in the figure. (Fig 8-40)
Disassemble Fan Motor
Assy
(Fig 8-40)
Press downward the clasps fitting the front
and rear propeller housings, then pull upward
to remove the front propeller housing (refer to
Figure 8-41).
Hold the clasp position of the rear propeller
housing and pull upward to remove the rear
propeller housing (refer to Figure 8-42).
Use special tool to screw off the two holding
screws at the coupling, move the coupling
toward the fan until the coupling and shaft
sub-assy can be removed; use special tool to
remove the holding screw fixing the fan to
remove the fan (refer to Figure 8-43).
(Fig 8-41) (Fig 8-42)
Clasp Position Holding Screw
Clasp Position
Disassemble Bearing Mounting Plate
Use screwdriver to screw off the four screws at
the bearing mounting plate. (Figure 8-44).
Disassemble Motor
Use screwdriver to screw off the screw shown
in the figure to remove the motor clamp and
the motor fixing hoop.(Figure 8-45)
Screw Screw
(Fig 8-44) (Fig 8-45)
Summary of Contents for AIR F24
