5
R E LI AG E A R® LV SG
LO W VO LTAG E S W I TC H G E A R
Testing and Inspection
: reviews items which
should be tested or inspected prior to energizing
and operating the switchgear.
Cooling fan control module
: describes the
components, setup, test and maintenance
procedures for the optional cooling fan
compartment.
Operating the switchgear
: covers how to
operate the breakers, and contains information
concerning draw-out provisions, doors, and various
accessories.
Energizing the switchgear
: outlines the steps
to be taken before and during the electrical
energization of the equipment.
Maintaining the switchgear
: provides instructions
for all preventive maintenance, servicing, and
lubrication information for the switchgear
equipment. Included is service and maintenance
data for the circuit breakers, instrument
compartments, instruments, bus
bar joints, and cable and busway connections. This
section also includes paint refinishing
requirements.
Appendices A, B, C and D contain information
concerning screw and bolt torque values,
circuit breaker rejection features, circuit
breaker information and spare parts.
Related publications
Addenda to this instruction book are the available
service and maintenance publications supplied
separately for circuit breakers, relays
and other devices not described in this
instruction book.
—
01
ReliaGear LV SG
low voltage
switchgear
In addition to instruction books, the following As-
built documentation will be supplied as required
for each order of ReliaGear LV SG switchgear
equipment:
1. General arrangement drawings, including front
view and floor plan.
2. Elementary and connection drawings (or wiring
routing tables) which indicate and identify test
and connection points including terminal blocks,
device studs, switch contact developments, and
remote connections.
3. Summary of switchgear equipment which is
a list of all the components furnished with the
switchgear, including the breakers, identified
by catalog number.
These are all the documents necessary to install,
operate, and maintain the equipment. One
complete set of drawings and this instruction
book is shipped with the equipment. An electronic
copy of this documentation package is also sent to
the customer after shipment.
—
01
