![GE 869 Communications Manual Download Page 54](http://html1.mh-extra.com/html/ge/869/869_communications-manual_4102486054.webp)
7-4
869 MOTOR PROTECTION SYSTEM – COMMUNICATIONS GUIDE
INTEROPERABILITY
CHAPTER 7: IEC 60870-5-103
PATH:
SETPOINTS > DEVICE > COMMUNICATIONS > IEC103 POINT LISTS > COMMANDS
Interoperability
Physical layer
Electrical interface
Optical interface
Transmission speed
Link layer
There are no choices for the Link Layer.
Message
■
COMMANDS
■
Command 0 Func Type:
0
Message
Range: 0 to 255 in steps of 1
Default: 0
Message
Message
Message
Command 0 ON:
off
Command 0 Info Num:
0
Range: 0 to 255 in steps of 1
Default: 0
Range: 0 to 255 in steps of 1
Default: 0
First Analog Factor:
0
Message
Message
Range: 0 to 255 in steps of 1
Default: 0
First Analog Factor:
0
Message
Message
Range: FlexLogic operand
Default: Off
TM
Command 0 OFF:
off
Command 31 Func Type:
0
Command 31 ON:
off
Command 31 Info Num:
0
Command 31 OFF:
off
Range: FlexLogic operand
Default: Off
TM
Range: 0 to 255 in steps of 1
Default: 0
Range: 0 to 255 in steps of 1
Default: 0
Range: FlexLogic operand
Default: Off
TM
Range: FlexLogic operand
Default: Off
TM
⊠
EIA RS-485
32
Number of loads for one protection equipment
□
Glass fibre
□
Plastic fibre
□
F-SMA type connector
□
BFOC/2,5 type connector
⊠
9600 bits/s
⊠
19200 bits/s
Summary of Contents for 869
Page 6: ...1 2 869 MOTOR PROTECTION SYSTEM COMMUNICATIONS GUIDE COMMUNICATIONS CHAPTER 1 INTRODUCTION...
Page 36: ...4 12 869 MOTOR PROTECTION SYSTEM COMMUNICATIONS GUIDE DNP IMPLEMENTATION CHAPTER 4 DNP 3...
Page 84: ...9 2 869 MOTOR PROTECTION SYSTEM COMMUNICATIONS GUIDE CHAPTER 9 FILE TRANSFER PROTOCOLS...